Login   Returns   Site Map   Tracking   View Cart   Checkout  

Tools
Sort By:
Tool (Clutch Compressor); Vespa P/PX, Genuine StellaTool (Clutch Compressor); Vespa P/PX, Genuine StellaA very handy tool for taking apart your clutch. Compresses the springs gradually so you can remove the circlip. For all largeframe Vespa clutches.
Tool (Clutch Nut); Vespa P/PX, Genuine Stella 2TTool (Clutch Nut); Vespa P/PX, Genuine Stella 2TThis is a necessary tool for removing the clutch on all largeframe Vespa models (except GS with a tapered shaft). It removes the castellated nut that holds on the clutch. Be sure to bend back the tab on the locking washer first (and replace it with a new one)!
Tool (Flywheel Extractor); Vespa P/PX, Genuine Stella 2TTool (Flywheel Extractor); Vespa P/PX, Genuine Stella 2TFlywheel puller for all P and PX series Vespas. This tool is necessary to remove the flywheel on these models.
Tool (Fuel Tap Wrench) ; Vespa P/PX, Genuine Stella 2TTool (Fuel Tap Wrench) ; Vespa P/PX, Genuine Stella 2TTool for removing the fuel valve on all vintage Vespa models. This tool is necessary to get to the nut at the bottom of the fuel tank.
Tool Roll w/ Cloth BagTool Roll w/ Cloth BagOur best mini tool kit for your glovebox. Contains a combination screwdriver, 10/13mm wrenches, and a spark plug wrench with a 13mm socket on the other end, all in a heavy duty fuzzy bag.
Tool, Clutch Puller - GSTool, Clutch Puller - GSAll GS150 models and some GS160 have tapered crankshafts on the clutch side, and this tool is necessary to remove those clutches.
Tool, Clutch Puller - SF (ART.5421)Tool, Clutch Puller - SF (ART.5421)This tool is necesary to remove the clutch on all smallframe Vespas.
Tool, Flywheel Puller - BajajTool, Flywheel Puller - BajajTool for removing the flywheel on all the newer replacement flywheels for VBB and Sprint type bikes, as well as for our EIK electronic ignition kit. One comes with our kit, but if you lose yours, this is the one!
Tool, Flywheel Puller PK (ART.5260)Tool, Flywheel Puller PK (ART.5260)Tool for temoving the flywheel on Vespa PK models with threaded flywheel center.
Tool, Fourth Hand - Cable Puller/HolderTool, Fourth Hand - Cable Puller/HolderThis is the handiest tool you'll ever use on a vintage Vespa! It clutches the cable inner and holds it tight while you tighten down the pinchbolt. This model also locks in place so you can take your hand off the tool while you work! Ingenious!
Tool, Motion Pro - Supermoto Bead BuddyTool, Motion Pro - Supermoto Bead BuddyBEAD BUDDY * For use on 3 1/2 in. to 5 in. wheel widths * Used to push the tire bead down into the drop center of the rim on supermoto wheels while using tire tools to change tires * Hooks over spoke and pushes bead down on opposite side of tire from tire levers * No more fighting to keep the bead down while installing your tires
Tool, Motion Pro - Valve Spring CompressorTool, Motion Pro - Valve Spring CompressorVALVE SPRING COMPRESSOR * Improved quick action design * Used in same applications as Honda tool 07757-0010000 and Kowa tool AKS-215-1010 OEM tools * Accepts Motion Pro adapters (08-0248) as well as Honda OEM adapters 07GME-KT70200, 07JME-KY20100, and 07959-KM30101 for use in shim under bucket and small diameter valve spring keeper applications * Both cup-type and ball-type tips are included
Tool, Steering Ring Nut (ART.5419)Tool, Steering Ring Nut (ART.5419)This tool loosens and tightens the notched ring nut that holds in the steering column on all Vespa models. Very handy!
Top Dead Center Tool (ART.4931)Top Dead Center Tool (ART.4931)A very handy tool for finding top dead center on any scooter! Screws into the spark plug hole and stops the piston from travelling. Combined with a degree wheel, you can precisely locate top dead center and make your timing marks.
Valve Stem (4-Pack)Valve Stem (4-Pack)Pop-in valve stems (4-Pack)
Valve Stem - Brass Genuine OEMValve Stem - Brass Genuine OEM90 degree brass valve stem OEM PGO brand
1 2 3


THANK YOU FOR SUPPORTING OUR SMALL FAMILY-RUN BUSINESS
_____________________________________________________

PLEASE NOTE 
THE FOLLOWING DATE WE WILL BE CLOSED:

April 26th
July 4th and 24th
August 1st - 3rd
November 28th - 30th
December 25th - end of 2024  


We gladly service the brands we sell:  
~VESPA, PIAGGIO, GENUINE, NIU, ROYAL ALLOY, SYM, LANCE AND SCOOTSTAR~

Please call or email to schedule an appointment before bringing your scooter in.  Scooters are accepted during business hours so please do not leave your scooter outside our building after store hours.  If you experience a problem regarding our repairs on your scooter, please bring it back within 30 days so we can make it right.  Vehicles that are not picked up upon completion after 3 business days will be charged storage fees of $10/day unless arrangements are made with management.  After 30 days property will be considered abandoned and sold.

We DO NOT work on off-brand scooters made in China unless they can get to us under their own power and are approved by management.  
 
We DO NOT work on legacy vehicles (scooters that are out of production) unless they can get to us under their own power and are approved by management. 

We DO NOT work on mopeds (gas powered vehicles with pedals), Honda Express, Trails, or Passports.  

We DO NOT work on motorcycles. 

We DO NOT work on stand up kick scooters unless it is a brand that we sell.

We DO NOT work on electric bicycles unless it is a brand that we sell.

We have a waiting list if you need work on Vintage Vespas.  Please do not drop off your vintage Vespa unless we have called you to bring it in.
 
_____________________________________________________
All parts orders should be placed through this website.  
For assistance please email us at parts@thescooterlounge.com.  
We cannot place order over the phone.