Malossi, Cylinder Kit; GP1/Runner 50 The Malossi Cylinder achieved thanks to its modified �berstromkan�le, a larger exhaust and higher compression very high speeds. In this way leads to the impressive performance gains for the Malossi is famous!
The cylinder is made of cast iron. A wholly-cylinder for driving pleasure.
* Capacity: 68 cc
Component of 317,353
* 277054C0 replacement reeds for 277708C0 Scooter 50 Piaggio and Minarelli Scooter 50 original membrane lieg.Zylinder
* 347,036 Piston 47,0 mm Scooter 50 Piaggio, Peugeot, Honda, Kymco (68ccm Malossi Gu�zylinder)
* 2311783B piston pin 12 x 38mm Scooter 65-70ccm
* 6611785B piston pin bearing d12-D17-B16 Malossi
* 364,450 piston pin retainer 12mm C (1)
354,501 * Piston ring 47,0 mm x 1.5 mm kit-complete (2 pieces)
* 117,438 Zylinderdichtsatz Scooter Piaggio 50 WATER. (50 +68 cc Malossi cast and Aluzylinder)
for the following engines
Piaggio * 50 2-stroke water-cooled Scooter 1995-1999
Piaggio Scooter * 50 2-stroke water-cooled 1998 - (short motor housing)
Piaggio Scooter * 50 2-stroke water-cooled 1998 - (mean length of the motor housing)
Piaggio Scooter * 50 2-stroke water-cooled 1998 - (long motor housing)
for the following vehicles
view
* Aprilia SR 50 2004 - watercooled (Piaggio engine)
* Aprilia SR 50 R FACTORY (carb version)
* Derbi GP1 50 2001-2002
* Derbi GP1 50 2003
Derbi GP1 50 * Euro2 2005 () with chain drive
Derbi GP1 50 * Euro2 Race 2005-2007 () with chain drive
* Euro2 Derbi GP1 50 Open 2006-2009 () with chain drive
* Gilera DNA 50 2000-2002
* Gilera DNA GP EXPERIENCE 50 2003-2004
* Gilera DNA 50 2005-2007
* Gilera RUNNER 50 Purejet 2005-2008 RST (14 "front wheel)
* Gilera RUNNER 50 watercooled 1997-2000 with rear disc brakes (12 "front wheel)
* Gilera RUNNER 50 watercooled 1997-2000 with drum brakes and rear (12 "front wheel)
* Gilera RUNNER 50 watercooled 2002-2004 with rear disc brakes (12 "front wheel)
* Gilera RUNNER 50 watercooled 2005-2009 RST (14 "front wheel)
* Water-cooled Piaggio NRG 1994-1996
* Water-cooled Piaggio NRG 1996-1998 MC2 with rear disc brakes
* Water-cooled Piaggio NRG 1996-1998 MC2 with rear drum brake
* 1999-2001 Piaggio NRG EXTREME water cooled with rear disc brakes
* Piaggio NRG MC3 watercooled 2001-2004 with rear disc brakes
* Water-cooled Piaggio NRG 2005-2006 POWER with rear disc brakes
* Water-cooled Piaggio NRG 2007-2009 POWER with rear disc brakes
* Water-cooled Piaggio NTT 1995-1996
* Piaggio zip 50 2-stroke water-cooled 1996-1999 SP
* Piaggio zip 50 2-stroke water-cooled 2000-2004 SP
* 50 2-stroke Piaggio ZIP SP 2006-2009 Euro2 watercooled
|
|
|
Malossi, Cylinder Kit; Kymco ZX50/ Honda DIO M 317200
Scooter 72ccm cylinder head castings Kymco, Honda, Daelim
317200
The Malossi Cylinder achieved thanks to its modified �berstromkan�le, a larger exhaust and higher compression very high speeds. In this way leads to the impressive performance gains for the Malossi is famous!
The cylinder is made of cast iron. A wholly-cylinder for driving pleasure.
* Capacity: 72 cc
Component of 317,200
* 272728C0 replacement reeds Scooter 50 Morini, Peugeot, Honda for the original membrane (3 strengths 0.3 / 0.35 / 0.40 mm)
* 347,036 Piston 47,0 mm Scooter 50 Piaggio, Peugeot, Honda, Kymco (68ccm Malossi Gu�zylinder)
* 2311783B piston pin 12 x 38mm Scooter 65-70ccm
* 364,450 piston pin retainer 12mm C (1)
354,501 * Piston ring 47,0 mm x 1.5 mm kit-complete (2 pieces)
* 119,588 Zylinderdichtsatz Peugeot luftgek., Honda 68ccm molding
for the following engines
* Daelim Scooter 50 air-cooled (Message, Tapo)
* Scooter Kymco 50 (Honda engine - vertical cylinder)
for the following vehicles
view
* Daelim GZ 50 Message 1997-2002
* Daelim TAPO 50
* Honda SK 50 DIO G
* Honda SK 50 DIO SP
* Honda SK 50 DIO SR
* Honda SK 50 DIO ZX
* Kymco CX 50 1993 in front with drum brakes
* Kymco CX 50 1994-1997 SUPER with disc brakes front
Kymco DJ * W 1994-2000 in front with drum brakes
* Front Kymco DJ Y 1993-2006 with drum brakes
* Kymco K12 1995-2000 (12 inch tires)
Kymco KB * 1995-2000 (10-inch tires)
* Kymco ZX SUPER FEVER II, 1999-2006
|
|
|
Malossi, Cylinder Kit; Vespa P200 ***Now available with performance cylinder head! Use Part M 3113764***
Perhaps the most popular kit for the 200cc (P, PX, and Rally 200) is all about high-RPM power. An aluminum-nikasil cylinder that many aficionados swear by. This kit will boost your displacement to 210cc, but also add better porting for added power!
Perfect when mated with a Prima pipe! The 26/26 carbs are very popular with this cylinder too.
***PLEASE NOTE***
Performance upgrades are considered racing parts and are not covered by warranty. There are too many variables involved with user-installed parts, and pushing the limits of your engine tends to wear parts faster. Use at your own risk!
|
|
|
MHR Cyl Kit - GP1/Runner 50 Malossi's MHR Cylinder Kits are arguably the finest performance kits available, period. They feature alloy castings, precision machined, with Nikasil lined bore and Asso pistons. Made in Italy.
This kit is for Derbi GP1 pre-Piaggio motors.
|
|
|
MHR Cyl Kit - Yesterday, F10/12 air Malossi's MHR Cylinder Kits are arguably the finest performance kits available, period. They feature alloy castings, precision machined, with Nikasil lined bore and Asso pistons. Made in Italy.
This kit is for Malaguti Yesterday, F12, and F12 Air cooled motors.
|
|
|
NCY Cylinder Kit (10mm Pin, 72cc); 2T Minarelli 50 Horizonta This Air-cooled, 72cc big bore kit consists of a top-quality, Iron cylinder and a 2-ring alloy piston / 10mm wrist-pin design that makes this kit extremely durable and powerful.
Perfect fit for a Yamaha Jog, Zuma or Genuine Buddy 50 or Roughhouse 50 looking for more power, on a budget.
|
|
|
NCY Cylinder Kit, Ceramic, 58.5mm - Vento/GY6 NCY GY6 150 58.5mm Ceramic Cylinder Kit w/o head
Do you run your GY6 150 scooter at high RPMs regularly? If so then perhaps you should consider this bolt on ceramic 155cc kit for most GY6 125/150 engines. The ceramic coat allows for the engine to run a much higher RPM than normal. Part # 1100-1283, 58.5mm big valve head is a great addition to this kit and will add a couple cc's as well! Don't forget when putting a larger cylinder on your scooter, to upjet your carburetor. We recommend starting your jetting rich and then working your way down to the perfect mix.
|
|
|
NCY Cylinder Kit, Ceramic, 62mm - Vento/GY6 NCY GY6 150 62mm Ceramic Cylinder Kit w/o head
Are you a racer? If so then this 175cc ceramic kit is for you! The ceramic coat allows for the engine to run a much higher RPM then normal which will get you that extra fire that you've been itching for on the go-cart tracks. This isn't a bolt on item though for most GY6125/150 engines. Most of the time, engine cases must be cut. Order part number 1400-1001, Engine Bore Tool If there is no access to a machine shop. It’s also recommended to get part number 1100-1254, 61mm big valve head as well, as some stock heads will not fit.
|
|
|
NCY Piston Kit (Replacement, 47mm, 10mm); Yamaha, Genuine NCY replacement piston assembly for Genuine Buddy/ Minarelli 47mm NCY Cylinder kit (PRCK1).
Includes piston, pin, clips, rings.
Replacement Gasket set # 1100-1415
Fits part #PRCK1
|
|
|
NCY TRANSMISSION KIT; SYM, LANCE, ROYAL ALLOY Smooth out your powerband with this NCY super trans kit!
Enjoy quicker accelleration, higher top speeds, rapid down shifting and slow cruising.
Ultralight, balanced components, oversized wear pads, and sta
|
|
|
Pinasco 177cc Cylinder Kit (2 port); Vintage Vespa New from Pinasco comes this cast-iron performance kit for 2-port largeframe vintage Vespas. No longer do you have to mess with cutting extra ports or custom base gaskets! Bolt this on to your VNB, VBB, GL, Early Sprint/Super/GT and unleash the power!
This will boost your displacement to 177cc (for all models) and give better porting for an engine that breathes! This is the ONLY kit on the market for 2-port largeframe Vespas!
Great in combination with a 20/20 or 24/24 carb and Sito Plus P125 pipe!
|
|
|
Pinasco Cylinder Kit (177.7cc); VNX, Stella 2t The ONLY aluminum cylinder available for 125/150 engines. Slightly less power than the Polini, but better heat dissipation and more reliable. We highly recommend this kit for daily drivers and touring bikes.
A Prima pipe is perfect for bringing out the power this kit can generate. Another popular upgrade is a 24/24 or 26/26 carb.
***PLEASE NOTE***
Performance upgrades are considered racing parts and are not covered by warranty. There are too many variables involved with user-installed parts, and pushing the limits of your engine tends to wear parts faster. Use at your own risk!
|
|
|
| Polini cast 75cc Cylinder Kit (Vespa 50)A good, inexpensive upgrade for those pokey Vespa 50s. Works very well with a Leo Vinci or Polini pipe, 16/16 carburetor, and Vespa 90 primary gearing. Made of cast iron and comes with a cylinder head.
***PLEASE NOTE***
Performance upgrades are considered racing parts and are not covered by warranty. There are too many variables involved with user-installed parts, and pushing the limits of your engine tends to wear parts faster. Use at your own risk!
|
|
|
Prima Cylinder Gaskets (Replacement, 47mm); Genuine, Minarel Prima Replacement cylinder gaskets for Genuine, Yamaha, or Minarelli engine with 47mm cylinder kit.
Quality replacement part.
Fits part #PRCK1
|
|
|
Prima Cylinder Kit (Aluminum, 58.5mm, 161cc); Buddy 125 ONLY Make your 125 a screamer! This big bore kit includes cylinder, piston, rings, pin, clips, cylinder spacer, and gaskets. Also included are a thin set of gaskets for installation of 150 and/or big valve head on the 125 engine.
-Kit increases displacement to 161cc.
-Increases torque and horsepower.
-Greater top speeds and faster acceleration.
-Best HP bolt-on, dollar for dollar!
-Fits the Buddy 125 engine only.
-Voids your factory warranty! Go nuts!
|
|
|
Prima Cylinder Kit, Kymco 50cc LC |
|
|
Prima Keihin PB Main Jet Kit (4mm, 10 pcs); QMB139, Gen 50cc Contains 70, 75, 80, 85, 90, 95, 100, 105, 110, 115 jets.
|
|
|
Scorpion Exhaust (Black);Royal Alloy GT 150 Add a piece of the UK and some extra power to your Royal Alloy GT150 with the all new Scorpion Exhaust System. This stunning black ceramic exhaust will add half a horsepower in performance and make your RA look stunning with some of that Made in the UK styling. The “black ceramic” canister and T304 stainless steel header make this exhaust stand out. And to top it off, this exhaust comes with a lifetime warranty. Make sure to register your pipe at the web address www.scorpion-exhausts.com/register-here
|
|
|
|
Login 
Returns
Site Map
Tracking
View Cart
Checkout